The AS 2000 Seating System offers an innovative and economic approach to operators of Sport Facilities to enable them to comply with ever changing seating regulation.

The seats are installed directly onto stadium terracing using appropriate fixing anchors.
In the event of dimensions of terracing not providing the correct eating height the seats can be supported on either riser ot thread fixing individul or multiple beam metal understructures.
Separate arm rest for mounting betwen seats and separate writing shelves are also available

	AS 2000/S
	Seat pod only which can be installed where it is not necessary to have backrest.
	AS 2000/B
	Attachess to seat pod AS2000/S and to the terrace with additional fixing anhors. Thus a stadium which has previously installe AS 2000/S and is progresing o higher standards can upgrade its seating wihout having to completely replace the existing seating
	AS 2000/SB
	The combination of the seat AS2000/S and the back rest AS 2000/B when supplied and installed at the same time.

Features:

The strength of the AS2000 stadium seat

   AS2000 features
•  6 fixing points using M8 anchors through 20/25 mm thick fixing
    bosses,
•  2 for the seat and 4 for the back
•  The thin bullnose at front of the seat prevents manual pulling-up of the
    seat
•  Double skin backrest for extra strength.
•  Seat and back components can be replaced individually if necessary

Competitor´s weaknesses
•  2 anchor points through 15 mm thick fixing
   bosses. A third fixing point on the front of
   some seats still does not prevent breakege
   across the two main fixing points when
   forces are applied from behind the back.
•  The thick bullnose at front of the seat
   enables manual pull-up forces to be exerted.
•  Some units only have a single skin backrest making them easier to
   break and stress mark.
•  Complete units have to be replaced when demaged